Ultra-compact low-loss 1 × 4 optical power splitter with splitting ratio of 1∶2∶4∶8 based on two-stage cascaded MMI couplers.

Clicks: 439
ID: 86737
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Emerging

Ranked #4 of 64 articles by views in optics letters

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
An ultra-compact low-loss 1×4 optical power splitter with a splitting ratio of 1∶2∶4∶8 is proposed and demonstrated on a 220-nm-thick silicon-on-insulator (SOI) platform at the C band. The splitter is based on two stages of a cascaded 1×3 multimode interference (MMI) coupler and a 4×4 MMI coupler. The footprint of the device is 124.0  μm×6.4  μm, which is more compact than the traditional scheme of four-stage cascaded 1×2 MMI couplers. Phase shifters based on taper waveguides are incorporated in the device as the connection of two MMI couplers. The fabricated device exhibits a 3 dB power difference with a deviation of less than 0.88 dB from 1530 nm to 1570 nm. The average power difference is 3.14 dB at the center of the C band with an insertion loss of 1.84 dB.
Reference Key
li2019ultracompactoptics Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors
Journal optics letters
Year 2019
DOI
10.1364/OL.44.005622
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.