Polymer Concentration and Solvent Variation Correlation with the Morphology and Water Filtration Analysis of Polyether Sulfone Microfiltration Membrane
Clicks: 457
ID: 7790
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
82.3
/100
457 views
347 readers
Trending
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #2 of 42 articles by views in advances in polymer technology
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Microfiltration flat sheet membranes of polyether sulfone (PES) were fabricated by incorporating varying concentrations of polymer and investigated the influence of substituting solvents. The membranes were prepared via immersion precipitation method. Different solvents that included NMP (N-methyl-2-pyrrolidone), DMF (dimethylformamide), and THF (tetrahydrofuran) were used to analyse their effect on the performance and morphology of the prepared membranes. Two different coagulation bath temperatures were used to investigate the kinetics of membrane formation and subsequent effect on membrane performance. The maximum water flux of 141 ml/cm2.h was observed using 21% of PES concentration in NMP
Abstract Quality Issue:
This abstract appears to be incomplete or contains metadata (94 words).
Try re-searching for a better abstract.
| Reference Key |
r2019polymeradvances
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Alvi, Muhammad Azeem U. R.;Khalid, Muhammad Waqas;Ahmad, Nasir M.;Niazi, Muhammad Bilal K.;Anwar, Muhammad Nabeel;Batool, Mehwish;Cheema, Waqas;Rafiq, Sikandar;Alvi, Muhammad Azeem U. R.;Khalid, Muhammad Waqas;Ahmad, Nasir M.;Niazi, Muhammad Bilal K.;Anwar, Muhammad Nabeel;Batool, Mehwish;Cheema, Waqas;Rafiq, Sikandar; |
| Journal | advances in polymer technology |
| Year | 2019 |
| DOI |
10.1155/2019/8074626
|
| URL | |
| Keywords | Keywords not found |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.