X-ray phase contrast observation of solidification and hot crack propagation in laser spot welding of aluminum alloy.

Clicks: 447
ID: 77523
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Popular

Ranked #8 of 81 articles by views in Optics express

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
The inner characteristics of solidification and crack propagation in laser spot welding of four representative aluminum alloys, A1050, A2024, A5083 and A6061, were firstly observed with the X-ray phase contrast method. Keyhole disappeared within 1 ms after the laser was shut down. The solidification process finished in 2 ms for A1050, 3 ms for A2024, 5 ms for A5083, and 3 ms for A6061, respectively. Longitudinal view area of the molten pool decreased as the thermal conductivity increased, while the average solidification rate increased with increase of the thermal conductivity. Hot crack was observed to propagate from the bottom to the upper surface in the center of spot weld of A2024, A5083, and A6061, which was also the first in situ observation of crack during the welding process. Both the SEM, EBSD and Micro-X-ray computed tomography (CT) results validated that there was a crack propagation in the spot weld, and the mechanism for this crack formation was discussed. This paper provides a better understanding of solidification and crack formation in laser manufacturing.
Reference Key
miyagi2018xrayoptics Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Miyagi, Masanori;Kawahito, Yousuke;Wang, Hongze;Kawakami, Hiroshi;Shoubu, Takahisa;Tsukamoto, Masahiro;
Journal Optics express
Year 2018
DOI
10.1364/OE.26.022626
URL
Keywords
finite element model adhesive types bond line thickness epoxy adhesive nugget size resistance welding three-sheet weld-bonding

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.