Spatially resolved and two-dimensional mapping modulated infrared photoluminescence spectroscopy with functional wavelength up to 20 μm.

Clicks: 339
ID: 66557
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #9 of 39 articles by views in The Review of scientific instruments

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
The pixel-scale nonuniformity of the photoelectric response may be due either to the in-plane electronic inhomogeneity of the narrow-gap semiconductor or to the craft fluctuation during the fabrication process, which limits the imaging performance of the infrared focal plane array (FPA) photodetector. Accordingly, a nondestructive technique is most desirable for examining the spatial uniformity of the optoelectronic properties of the narrow-gap semiconductor to identify the origin of the FPA response nonuniformity. This article introduces a spatially resolved and two-dimensional mapping infrared photoluminescence (PL) technique, especially suitable for characterizing FPA narrow-gap semiconductors, based on the modulated PL method with a step-scan Fourier transform infrared spectrometer. The experimental configuration is described, and typical applications are presented as examples to a 960 × 640 μm area of an InAsSbP-on-InAs layer in the medium-wave infrared range and a 960 × 960 μm area of a HgTe/HgCdTe superlattice (SL) in the long-wave infrared range. The results indicate that, within a measurement duration of about 30 s/spectrum, a sufficiently high signal-to-noise ratio (SNR) of over 50 is achieved with a spectral resolution of 16 cm for the InAsSbP-on-InAs layer and a SNR over 30 is achieved with a spectral resolution of 12 cm for the HgTe/HgCdTe SL, which warrants reliable identification of the subtle differences among the spatially resolved and two-dimensional mapping PL spectra. The imaging of the in-plane distribution of PL energy, intensity, and linewidth is realized quantitatively. The results indicate the feasibility and functionality of the spatially resolved and two-dimensional mapping PL spectroscopy for the narrow-gap semiconductors in a wide infrared range.
Reference Key
chen2019spatiallythe Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors
Journal The Review of scientific instruments
Year 2019
DOI
10.1063/1.5111788
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.