Probing the Field-Effect Transistor with Monolayer MoS Prepared by APCVD.
Clicks: 320
ID: 66513
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
74.8
/100
320 views
200 readers
Trending
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #96 of 331 articles by views in Nanomaterials
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 331 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The two-dimensional materials can be used as the channel material of transistor, which can further decrease the size of transistor. In this paper, the molybdenum disulfide (MoS) is grown on the SiO/Si substrate by atmospheric pressure chemical vapor deposition (APCVD), and the MoS is systematically characterized by the high-resolution optical microscopy, Raman spectroscopy, photoluminescence spectroscopy, and the field emission scanning electron microscopy, which can confirm that the MoS is a monolayer. Then, the monolayer MoS is selected as the channel material to complete the fabrication process of the back-gate field effect transistor (FET). Finally, the electrical characteristics of the monolayer MoS-based FET are tested to obtain the electrical performance. The switching ratio is 10, the field effect mobility is about 0.86 cm/Vs, the saturation current is 2.75 × 10 A/μm, and the lowest gate leakage current is 10 A. Besides, the monolayer MoS can form the ohmic contact with the Ti/Au metal electrode. Therefore, the electrical performances of monolayer MoS-based FET are relatively poor, which requires the further optimization of the monolayer MoS growth process. Meanwhile, it can provide the guidance for the application of monolayer MoS-based FETs in the future low-power optoelectronic integrated circuits.
| Reference Key |
han2019probingnanomaterials
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Han, Tao;Liu, Hongxia;Wang, Shulong;Chen, Shupeng;Xie, Haiwu;Yang, Kun; |
| Journal | Nanomaterials |
| Year | 2019 |
| DOI |
E1209
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.