Biodiesel Reactor Design with Glycerol Separation to Increase Biodiesel Production Yield

Clicks: 378
ID: 54355
2013
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #1 of 2 articles by views in makara journal of technology

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
The study consisted of reactor design used for transesterification process, effect of glycerol separation on
transesterification reaction, determination of biodiesel quality, and mass balance analysis. The reactor was designed by
integrating circulated pump/stirrer, static mixer, and sprayer that intensify the reaction in the outer tank reactor. The objective was to reduce the use of methanol in excess and to shorten the processing time. The results showed that the
reactor that applied the glycerol separation was able to compensate for the decreased use of the reactant methanol from 6:1 to 5:1 molar ratio, and changed the mass balance in the product, including: (i) the increase of biodiesel production
from 42.37% to 49.34%, and (ii) the reduction of methanol in excess from 42.37% to 32.89%. The results suggested that the efficiency of biodiesel production could be increased with the glycerol separation engineering.

Reference Key
rahmat2013biodieselmakara Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Rahmat, Budy;Setiasih, Imas;Kastaman, Roni;
Journal makara journal of technology
Year 2013
DOI
DOI not found
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.