Analyses of Different Adhesives on Pure Mode I and Mode II Delamination Growth of Composite Bonded Joints
Clicks: 499
ID: 54132
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
499 views
83 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #2 of 41 articles by views in proceedings
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This work aims to study the behaviour against delamination under static modes I and II of adhesive bonded joints in unidirectional carbon-fibre/epoxy prepreg. The double cantilever beam and end notched flexure tests were used to characterize the influence on the interlaminar fracture toughness under pure mode I and pure mode II, respectively. Three structural adhesives from different manufacturers were tested in comparison with the original material, that is, without adhesive bonded. The fracture surfaces were also examined for each joint system.
| Reference Key |
sanchez2018analysesproceedings
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Sánchez, Sara;Coronado, Patricia;Argüelles, Antonio;Viña, Jaime A.; |
| Journal | proceedings |
| Year | 2018 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.