Real time modeling and control of a wind farm connected to a multi-bus network under faulty conditions.
Clicks: 385
ID: 53707
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
385 views
43 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #5 of 43 articles by views in ISA transactions
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This paper describes the detailed modeling and simulation of an aerogenerators system based on DFIG using RT-LAB simulator. A stator flux oriented vector is applied to decouple the control of active and reactive powers generated by the DFIG, and other controllers are needed to keep the DC-link voltage and grid currents at desired values. In order to adjust appropriately the pitch angle and keep the wind power at rated value, a pitch control and MPPT are involved. The model of the studied was developed first in the MATLAB, then, it was rebuilt on RT-LAB to test its performance. Simulation results validate the capability of the platform to achieve rapid simulation of complex power systems. At the end, the details of the simulation results are presented, discussed, and concluded.
| Reference Key |
benaama2019realisa
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Benaama, Kamel;Khiat, Mounir;Barkat, Said; |
| Journal | ISA transactions |
| Year | 2019 |
| DOI |
S0019-0578(19)30131-4
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.