High-Performance Low-Voltage Flexible Photodetector Arrays Based on All-Solid-State Organic Electrochemical Transistors for Photosensing and Imaging.

Clicks: 355
ID: 44467
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Emerging

Ranked #69 of 899 articles by views in ACS applied materials & interfaces

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 899 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
The identifying characteristic of an organic electrochemical transistor (OECT) is the coupling between ionic and electronic charges within the entire volume of the channel. In this work, by taking advantage of the volumetric nature of the OECTs' response, a novel flexible photodetector is reported for the first time based on all-solid-state OECT with an excellent responsivity of up to 6.7 × 10 A/W, detectivity as high as 3.6 × 10 Jones, and a fast response of ∼0.13 s in the visible range, which are superior to those of the majority of the reported organic phototransistors (OPTs) based on field-effect transistors (FETs) and even better than those of FET-based phototransistors with two-dimensional (MoS and graphene) and perovskite materials. The high performance of the devices was ascribed to the combination of the higher carrier mobility of poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) as a channel and the volumetric nature of the OECTs' response, and the charge density of the volumetric channel was efficiently modulated by incident light compared to FETs. Moreover, OECT-based OPTs with quantum dots (CdSe/ZnS) as a light sensitizer were characterized under ultraviolet light, and they exhibited excellent photosensitivity, which further verified the superiority of OECT for phototransistors. Furthermore, a flexible image sensor was fabricated for the first time by integrating flexible OECTs-OPTs into a 10 × 10 array, which can clearly identify the target image under a bending state, indicating the great potential of OECTs-OPTs in the application of low-power, ultrasensitive flexible photodetectors and imaging technology.
Reference Key
yan2019highperformanceacs Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Yan, Yujie;Wu, Xiaomin;Chen, Qizhen;Liu, Yaqian;Chen, Huipeng;Guo, Tailiang;
Journal ACS applied materials & interfaces
Year 2019
DOI
10.1021/acsami.9b04486
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.