A Deep Learning Approach for Fusing Sensor Data from Screw Compressors.
Clicks: 407
ID: 42988
2019
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Steady Performance
74.3
/100
406 views
270 readers
Trending
AI Quality Assessment
Not analyzed
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Chillers are commonly used for thermal regulation to maintain indoor comfort in medium and large buildings. However, inefficiencies in this process produce significant losses, and optimization tasks are limited because of accessibility to the system. Data analysis techniques transform measurements coming from several sensors into useful information. Recent deep learning approaches have achieved excellent results in many applications. These techniques can be used for computing new data representations that provide comprehensive information from the device. This allows real-time monitoring, where information can be checked with current working operation to detect any type of anomaly in the process. In this work, a model based on a 1D convolutional neural network is proposed for fusing data in order to predict four different control stages of a screw compressor in a chiller. The evaluation of the method was performed using real data from a chiller in a hospital building. Results show a satisfactory performance and acceptable training time in comparison with other recent methods. In addition, the model is capable of predicting control states of other screw compressors different than the one used in the training. Furthermore, two failure cases are simulated, providing an early alarm detection when a continuous wrong classification is performed by the model.
| Reference Key |
alonso2019asensors
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Alonso, Serafín;Pérez, Daniel;Morán, Antonio;Fuertes, Juan José;Díaz, Ignacio;Domínguez, Manuel; |
| Journal | sensors |
| Year | 2019 |
| DOI |
E2868
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.