Chromium and Lead adsorption by avocado seed biomass study through the use of Total Reflection X-Ray Fluorescence analysis.
Clicks: 442
ID: 3902
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
65.9
/100
442 views
322 readers
Trending
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #2 of 55 articles by views in Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Adsorption is an effective method for the treatment of wastewater containing low concentrations of heavy metals. This kind of metals such as Chromium and Lead could affect health and the ecosystem. In this work, biomass of avocado seed was used as adsorbent. It was tested as adsorbent in natural form (NB), as a chemically activated (AB) form and as activated carbon (AC). Batch reactors were used to investigate the adsorbent efficiency. Concentration of metal ions was measured using Total Reflection X-Ray Fluorescence. Operational conditions influencing adsorption, such as: pH, adsorbent dose, initial concentration and contact time, were measured and controlled. The 80% of adsorption was reached, at pH: 5 and 25 °C, when were used 50 mL of: a 20 mg L of Cr (VI) solution with a dose of 1.25 g of NB, a 30 mg L of Pb (II) solution with a dose of 0.15 g of NB, a 50 mg L Pb (II) solution with a dose of 0.15 g of AB, a 30 mg L Cr (VI) solution with a dose of 0.35 g of AB, a 30 mg L of both metals, with a dose of 0.15 g of AC for Pb (II) and 0.7 g of AC for Cr (VI). In all cases, the pH value before and during the experiments remained constant, indicating the lack of acid/base reactions during the processes. The Langmuir adsorption isotherm model best fitted to the experimental data. The experimental results from kinetic studies best correlated using the pseudo-second order model. An increase in the remotion of both ions (Pb (II) and Cr (VI)), was observed when comparing the results obtained using the activated biomass. However, considering the loss of biomass that the pre-treatment causes, the remotion per gram of initial biomass does not vary significantly.
| Reference Key |
boeykens2019chromiumapplied
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Boeykens, S P;Redondo, N;Obeso, R Alvarado;Caracciolo, N;Vázquez, C; |
| Journal | Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine |
| Year | 2019 |
| DOI |
S0969-8043(19)30026-0
|
| URL | |
| Keywords | Keywords not found |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.