Application of 3D-printing extrusion technology in foundry production
Clicks: 319
ID: 37861
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
319 views
36 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #5 of 8 articles by views in litʹë i metallurgiâ
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
A brief review of the additive technologies used for producing the foundry forming tooling is carried out. The peculiarities of using extrusion 3D-ptinting technology for producing the foundry forming tooling in comparison with other additive technologies are considered. The possibilities to produce the foundry forming tooling from clay viscous-flowing materials using extrusion 3D-ptinting technology are demonstrated experimentally.
| Reference Key |
tolochko2019applicationlit
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Tolochko, N. K.;Andrushevich, A. A.;Vasilevsky, P. N.;Chugaev, P. S.; |
| Journal | litʹë i metallurgiâ |
| Year | 2019 |
| DOI |
DOI not found
|
| URL | |
| Keywords | Keywords not found |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.