Experimental Investigation on Crack Development Characteristics in Shallow Coal Seam Mining in China

Clicks: 148
ID: 36996
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #194 of 220 articles by views in energies

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 220 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
The development of cracks in mining is the scientific basis for the safety and environmental exploitation of shallow multiple-seam. According to the “thickness of coal seam, interactive distance, and buried depth,„ four mining coal mines are selected in Shen Fu-Dong Sheng coalfield (SFDSC). To research the mining conditions of shallow coal seam under different base-load ratio mining conditions and different working faces by the physics simulation and in-sit measurement, the key roof caves are sketched by different colors. This study shows that the typical shallow coal seams in the thin overlying bedrock and thick loose sand layer (LSL) as well as the development of the setup entry cracks (SEC) is dominated by LSL arch damage. The surface cracks are almost directly above the setup entry. The flat seam mining and the SEC development is dominated by parabolic type. The surface cracks are located inside the setup entry. With the mining height increased typically in a shallow coal seam, the rate of crack development and the extent of damaged area increased significantly. The SEC and boundary cracks are fixed. The dynamic periodic cracks (DPC) show the ability of the strata to self-repair. During the multiple-seam mining, the above three kinds of cracks have the phenomenon of activation and development. Through the reasonable coal pillar distance arrangement, the development of boundary cracks can be effectively controlled and the relatively uniform surface settlement and crack closure can be achieved. The purpose of reducing damage mining can also be achieved. Furthermore, it provides scientific support for the green mining in the shallow coal seam.
Reference Key
huang2019experimentalenergies Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Huang, Qingxiang;He, Yanpeng;Cao, Jian;
Journal energies
Year 2019
DOI
DOI not found
URL
Keywords Keywords not found

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.