Improved methodology for performing the inverse Abel transform of flame images for color ratio pyrometry.

Clicks: 213
ID: 31928
2019
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Star

Ranked #39 of 50 articles by views in Applied optics

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
A new method is presented for performing the Abel inversion by fitting the line-of-sight projection of a predefined intensity distribution (FLiPPID) to the recorded 2D projections. The aim is to develop a methodology that is less prone to experimental noise when analyzing the projection of axisymmetric objects-in this case, co-flow diffusion flame images for color ratio pyrometry. A regression model is chosen for the light emission intensity distribution of the flame cross section as a function of radial distance from the flame center line. The forward Abel transform of this model function is fitted to the projected light intensity recorded by a color camera. For each of the three color channels, the model function requires three fitting parameters to match the radial intensity profile at each height above the burner. This results in a very smooth Abel inversion with no artifacts such as oscillations or negative values of the light source intensity, as is commonly observed for alternative Abel inversion techniques, such as the basis-set expansion or onion peeling. The advantages of the new FLiPPID method are illustrated by calculating the soot temperature and volume fraction profiles inside a co-flow diffusion flame, both being significantly smoother than those produced by the alternative inversion methods. The developed FLiPPID methodology can be applied to numerous other optical techniques for which smooth inverse Abel transforms are required.
Reference Key
dreyer2019improvedapplied Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Dreyer, Jochen A H;Slavchov, Radomir I;Rees, Eric J;Akroyd, Jethro;Salamanca, Maurin;Mosbach, Sebastian;Kraft, Markus;
Journal Applied optics
Year 2019
DOI
10.1364/AO.58.002662
URL
Keywords Keywords not found

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.