Microforging technique for rapid, low-cost fabrication of lens array molds.

Clicks: 189
ID: 31559
2007
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Star

Ranked #42 of 50 articles by views in Applied optics

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
Interest in micro-optical components for applications ranging from telecommunications to life sciences has driven the need for accessible, low-cost fabrication techniques. Many microlens fabrication processes are unsuitable for applications requiring 100% fill factor, apertures approximately 1000 microm with high numerical aperture, and scalability to large areas (e.g., tens of centimeters to meters) with millions of lenses. We report on a flexible, low-cost mold fabrication technique that utilizes a combination of milling and microforging. The technique involves first performing a rough cut with a ball-end mill. Final shape and sag height are then achieved by pressing a sphere of equal diameter into the milled divot. Using this process, we have fabricated molds for rectangular arrays of 1-10,000 lenses with apertures of 25-1600 microm, sag heights of 3-130 microm, interlens spacings of 250-2000 microm, and fill factors up to 100%. Mold profiles have a roughness and figure error of 68 nm and 354 nm, respectively, for 100% fill factor, 1000 microm aperture lenses. The required forging force was modeled as a modified open-die forging process and experimentally verified to increase nearly linearly with surface area. The optical performance of lens arrays injection molded from microforged molds was characterized by imaging the point spread function and was found to be in the range of theoretical values. The process can be easily adapted to lenticular arrays as well. Limitations include milling machine range and accuracy.
Reference Key
forest2007microforgingapplied Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Forest, Craig R;Saez, Miguel A;Hunter, Ian W;
Journal Applied optics
Year 2007
DOI
DOI not found
URL URL not found
Keywords Keywords not found

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.