Bamboo fiber textile reinforced geopolymer system in strengthening unreinforced masonry brick walls

Clicks: 3
ID: 285100
2023
Free PDF
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #3,292 of 3,757 articles by views in Malay Journal

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 3,757 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Sign in to mint
Abstract
Old structures such as historic churches, old school buildings, and arches are often constructed with unreinforced masonry walls (URM), which typically consist of adobe or brick walls. The design of most URM is for gravity loads only and not intended to resist lateral forces induced by seismic activities. Most URM walls fail under in-plane shear. The main objective of this study is to provide an acceptable externally bonded strengthening method for URM brick walls. To maximize the impact of the study in preserving lives, environmentally friendly materials such as mill-scale (MS) waste, flyash (FA), and bamboo fibers (BF), were used to develop the strengthening system. MS powder was used to partially replace FA in geopolymer-making with optimum 1:5 MSto- FA ratio. BF extracted using 5% sodium hydroxide solution from Kawayan Tinik, and treated with additional 10% aluminum sulfate solution, were used as short fiber reinforcement and as BF geotextile to reinforce the MS-FA based geopolymer mortar that is used as the plastering for the strengthening system. Wallette size specimens, 350 mm x 350 mm, were subjected to diagonal shear tests in accordance with modified ASTM E519 guidelines. By strengthening the wallettes on both faces with the geotextile reinforced geopolymer system, their shear capacity improved, resulting in an average increase of 55.78% in the amount of shear force the wallettes can resist. The wallettes that were strengthened on one side only also improved with an average increase of 33.20% in average shear force resisted. The deformability of the wallettes, expressed as pseudo-ductility ratio, improved up to 1.55 ratio compared to 1.04 ratio of the control samples. This suggests that the specimen underwent additional deformation after the initial cracking, indicating that the strengthening method contributes in improving the overall shear performance of the strengthened URM wallette. The resulting modulus of rigidity of each strengthening method and tensile strength of BF textile were used as base values for ACI 549.4R analytical models to compute the nominal shear capacity of the wallettes. The computed nominal shear capacities present the shear contributions of the URM and of the proposed strengthening method.
Reference Key
persistent_1760654623_68f1751fbd192 Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Libre Jr., Roneh Glenn D.
Journal Malay Journal
Year 2023
DOI
DOI not found
URL
https://animorepository.dlsu.edu.ph/etdd_civ/4
Keywords Keywords not found

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

Comments

No comments yet. Be the first to comment on this article.