Application of fluidized-bed biofilm reactor in the biodegradation of polychlorinated biphenyls
Clicks: 1
ID: 284879
2006
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
0.0
/100
1 views
0 readers
AI Quality Assessment
Not analyzed
Readership in this journal
Ranked #2,218 of 3,757 articles by views in Malay Journal
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 3,757 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The biodegradation study was conducted using biofilm technology in a three-phase fluidized-bed reactor under anaerobic and aerobic conditions, and combining the anaerobic and aerobic processes in sequential mode. Aerobic biofilm was developed using microorganisms isolated from a PCB-contaminated soil with biphenyl as sole carbon source. The anaerobic biofilm was developed on the aerobic biofilm, which served as conditioning layer and facilitated attachment of the anaerobic sludge from a brewery wastewater treatment facility. The aerobic biofilm formed was 80um thick and was dominated by Pseudomonas sp. and Flavobacterium sp. On the other hand, the combined aerobic and anaerobic biofilms was 170um thick. The anaerobic biofilm was used to degrade Aroclor 1260 with an initial concentration of 10ppm. The hexa-to octachlorobiphenyls were dechlorinated through the removal of doubly flanked para and meta chlorines. The heptachlorobiphenyl was 19.99% dechlorinated through the removal of unflanked ortho chlorine, while the hexachlorobiphenyl was dechlorinated through the removal of singly flanked ortho chlorine. Pentachlorobiphenyls accumulated in the medium as the higher PCBs were dechlorinated. Peak profiles from Gas Chromatograph-Electron Capture Detector (GC-ECD) revealed new peaks not present initially but these were not identified by the Gas Chromatograph-Mass Spectrometer (GC-MS). These peaks may be congeners with chlorine atoms lower than five. The aerobic biofilm was acclimatized to PCBs by gradual exposure to PCBs. Acclimatization by alternate feeding of biofilm with biphenyl and PCBs initially caused physiological stress on the biofilm but regained catabolic activity as acclimatization progressed. In the acclimatization method where the initial PCB concentration was gradually increased, there were no observed negative effects on the biofilm but the extent of PCB degradation decreased with increase in initial PCB concentration. For the same acclimatization period, the two methods exhibited the same decrease in pH of the medium but the second method yielded slightly higher PCB degradation. In the process using solely aerobic process, PCB biodegradation rate increased from one batch to another reaching 95 + 2.01 % in five days after conducting ten batch runs. The kinetics of PCB degradation can be modeled by a kinetics that shifted from second to third order as the degradation rate increased. Analysis of the data using Table Curve for Windows (TCWIN) revealed a 3.4 order of reaction with a specific rate of 0.0050 ppm-h. Oxidative dechlorination also occurred with 79% of the chlorines removed. Peak profiles from GC-ECD showed the presence of peaks not present initially, however, these peaks were
| Reference Key |
persistent_1760653955_68f172834ae6a
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Borja, Josephine Quintillan |
| Journal | Malay Journal |
| Year | 2006 |
| DOI |
DOI not found
|
| URL | |
| Keywords | Keywords not found |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.