Chemical Extractive Technique for Commercial Purity Metals
Clicks: 161
ID: 276077
2018
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
12.3
/100
41 views
41 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
Commercial purity iron powders were produced by using a new hydrometallurgy process. It was found that the most important factor in enhancing the purity of iron was the number of water washing process. X-ray diffraction pattern showed that the high peak purity of iron powder increased with increasing the number of water washing. The developed new methodology was based on the reaction between the aqueous ferrous sulfate and the hydrochloric acid with the presence of high purity aluminum flake. The purity of iron powders increased considerably with increasing the multi-water washing for leachate containing iron powders. The purity of iron powders was reached up to approximately 93.5%. The mean particle size distribution and apparent density for the highest value of purity are 50-100 µm and 2.85 g/cm3 respectively.
| Reference Key |
mustafa2018chemical
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Mustafa, Ali Mundher; |
| Journal | مجلة النهرين للعلوم الهندسية |
| Year | 2018 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.