Donut-Shaped mmWave Printed Antenna Array for 5G Technology
Clicks: 234
ID: 273527
2021
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
234 views
25 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #50 of 113 articles by views in Electronics
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This article presents compact and novel shape ring slotted antenna array operating at mmWave band on central frequency of 28 GHz. The proposed structure designed at 0.256 mm thin Roggers 5880 is composed of a ring shape patch with a square slot etched at the top mid-section of partial ground plane. Through optimizing the ring and square slot parameters high bandwidth of 8 GHz is achieved ranging from 26 to 32 GHz with simulated gain of 3.95 dBi and total efficiency of 96% for single element. The proposed structure is further transformed in a 4 element linear array manner. With compact dimensions of 20 mm × 22 mm for array, the proposed antenna delivers high simulated gain of 10.7 dBi and is designed in such a way that it exhibits dual beam response over the entire band of interest and simulated results well agree with fabricated prototype measurements.
| Reference Key |
kamal2021electronicsdonut-shaped
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Mian Muhammad Kamal;Shouyi Yang;Saad Hassan Kiani;Muhammad Rizwan Anjum;Mohammad Alibakhshikenari;Zulfiqar Ali Arain;Abdul Aleem Jamali;Ali Lalbakhsh;Ernesto Limiti;Kamal, Mian Muhammad;Yang, Shouyi;Kiani, Saad Hassan;Anjum, Muhammad Rizwan;Alibakhshikenari, Mohammad;Arain, Zulfiqar Ali;Jamali, Abdul Aleem;Lalbakhsh, Ali;Limiti, Ernesto; |
| Journal | Electronics |
| Year | 2021 |
| DOI |
10.3390/electronics10121415
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.