Meltblown Solvated Mesophase Pitch-Based Carbon Fibers: Fiber Evolution and Characteristics

Clicks: 248
ID: 268718
2017
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #4 of 4 articles by views in c

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Potentially low-cost continuous carbon fibers are produced from solvated mesophase pitch through a patented meltblowing process. The structural evolution and properties of the fibers are characterized by various analytical methods. The meltblown fibers are continuous fibers which are collected into a fibrous web form, and the diameter of the filaments is attenuated by the flow rate of air streams. The spun fibers can be rapidly stabilized in air due to the high melting mesogens and the removable solvent. The carbonized fibers show a high carbon yield of 75 wt % (or 86 wt % if the solvents are neglected) and a mean diameter of 8–22 μm with typical fiber diameter distribution and variation. The evolution of the fiber structure depends not only on the processing temperature but also on the fiber diameter. The processed carbon fibers retain the same form as the spun fibers and have a low packing density and reasonable mechanical properties.
Reference Key
yue2017cmeltblown Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors Zhongren Yue;Chang Liu;Ahmad Vakili;Yue, Zhongren;Liu, Chang;Vakili, Ahmad;
Journal c
Year 2017
DOI
10.3390/c3030026
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.