Thermodynamic Analysis of Chemical Vapor Deposition Progress for SiC Coatings
Clicks: 171
ID: 267804
2014
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
171 views
18 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #13 of 17 articles by views in Key Engineering Materials
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Equilibrium compositions of chemical vapor deposition progress for silicon carbide (CVD-SiC) coatings with MTS/H2 mixture system were calculated by means of HSC Chemistry5.0 code, and influences of the reaction temperature (T), the system pressure (P) and the composition of raw materials (molar ratio of H2 to SiCH3Cl3, β) were investigated. Thermodynamic analysis showed that the value of nC /nSiC in reaction product decreased to a minimum and then increased with the increase of the reaction temperature between 700-1600°C, which meant an optimal reaction temperature existed theoretically for CVD-SiC coatings with highest purity. Furthermore, CVD-SiC coatings with high purity were obtained by experiments under the reaction pressure of 10kPa, H2/SiCH3Cl3 value of 10 and reacton temperature of 1100°C, which was in accordance with the theoretical prediction.
| Reference Key |
wei2014keythermodynamic
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Chen, Ming Wei;Qiu, Hai Peng;Jiao, Jian;Li, Xiu Qian;Wang, Yu;Xie, Wei Jie; |
| Journal | Key Engineering Materials |
| Year | 2014 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.