The influence of discharge power and heat treatment on calcium phosphate coatings prepared by RF magnetron sputtering deposition
Clicks: 189
ID: 266503
2007
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
6.3
/100
21 views
21 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
Ca–P coatings with different Ca/P ratio and composition were successfully prepared by RF magnetron sputtering deposition. The Ca/P ratio, phase composition, structure and morphological properties were characterized by XRD, FTIR, EDS and SEM analyses. All the as-sputtered coatings were amorphous and after IR-irradiation the coatings altered into a crystalline phase. The obtained coatings had a Ca/P ratio that varied from 0.55 to 2.10 and different phase compositions or mixtures of apatite, beta-pyrophosphate and beta-tricalciumphosphate structures were formed. Evidently, the phase compositions of the sputtered coatings are determined not only by the discharge power ratio of the hydroxylapatite and calcium pyrophosphate targets but also by the annealing temperature.
| Reference Key |
jansen2007journalthe
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Yan Yonggang,J. G. C. Wolke,Li Yubao,J. A. Jansen;Yan Yonggang;J. G. C. Wolke;Li Yubao;J. A. Jansen; |
| Journal | Journal of Materials Science: Materials in Medicine |
| Year | 2007 |
| DOI |
10.1007/s10856-007-0119-0
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.