Hydrometric characterization of the clays used in the manufacture of ceramic products in Ocaña, Norte de Santander

Introduction: Currently in Ocaña, Norte de Santander exists a great variety of natural deposits that can be used to manufacture products of masonry as they are blocks, tiles, bricks, tiles, among others; But the manufacturing companies obtain a lot of waste due to the lack of technological analysis of the raw material to forecast the behavior of the ceramic pastes and to improve the quality of the final product. Objective: In the present work the physical characterization by hydrometry of the clays used in one of the companies dedicated to the manufacture of H-10 blocks in Ocaña, Norte de Santander, was carried out. Methodology: The development of the research was carried out by performing physical tests on samples of clays with which the percentages of sands, silts, and clays were determined; Which were located in the Winkler diagram to identify the types of existing clays according to their texture and the type of product that can be made to be able to formulate a paste of ceramic material. Results: The results obtained show that the clays currently used by the company are in the minimum indexes for the elaboration of blocks, reason why the addition of other clays with which the adequate level of quality with which they comply the requirements established by current standards. Conclusions: It is indispensable to characterize the clays to optimize the production pulp and to avoid imperfections in the final product (Block H-10), thus evidently improving the environmental and economic resources of the company.