Study of In Situ Foamed Fly Ash Geopolymer.
Clicks: 224
ID: 262333
2020
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
224 views
28 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #539 of 812 articles by views in Materials (Basel, Switzerland)
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 812 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Foamed fly ash geopolymer was synthesized in this work to produce geopolymeric lightweight concrete (GLWC). Fly ash was activated by sodium silicate solution, and aluminum powder was employed as an in situ chemical foaming agent. The synthesized pastes were cured at 40 °C for 28 days, with bulk densities of resultant GLWCs ranging from 600 to 1600 kg/m. The resulting mechanical properties, thermal conductivity, microstructure, and reaction product were fully characterized. Results show that GLWC had higher mechanical strength than commercial aerated concrete and developed 80-90% of its corresponding 28 days strength after curing for 7 days. For densities from 1200 to 600 kg/m, the thermal conductivity diminished from 0.70 to 0.22 W/mK, which is much better than that of its counterpart, ordinary Portland cement (OPC). Scanning electron microscopy (SEM) images revealed decent matrices comprising geopolymeric gel and unreacted fly ash.
| Reference Key |
su2020studymaterials
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Su, Zijian;Hou, Wei;Sun, Zengqing;Lv, Wei; |
| Journal | Materials (Basel, Switzerland) |
| Year | 2020 |
| DOI |
E4059
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.