Axial Compressive Behavior of Geopolymer Recycled Lump Concrete
Clicks: 137
ID: 262307
2020
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
0.3
/100
137 views
1 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #679 of 812 articles by views in Materials (Basel, Switzerland)
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 812 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
To reduce the environmental pollution from cement production and the damage to natural resources from aggregate mining in the concrete industry, a relatively new concrete, termed geopolymer recycled lump concrete (GRLC), which uses geopolymer as the binding material to replace traditional cement and uses large demolished concrete lumps (DCLs) to partly replace concrete, is prepared in this study. Cubic and cylindrical GRLC specimens containing fresh geopolymer concrete and DCLs were tested under axial compression with various parameters, including the compressive strength levels of both fresh geopolymer concrete and DCLs, and the replacement ratio of DCLs. The compressive behavior of the GRLC specimens was compared with traditional cement recycled lump concrete (CRLC) specimens, with test results showing that GRLC specimens possess higher compressive strength than CRLC specimens under the same experimental conditions, which is due to the strengthening effect that fresh geopolymer concrete has on the DCLs. From the scanning electron microscope pattern of the GRLC specimen, it is found that the geopolymer bonds well with the old mortar attached to DCLs. As the replacement ratio increases from 0% to 33%, the elastic modulus of GRLC increases by 5%−11% but Poisson’s ratio remains almost constant (in the 0.16−0.17 range). Based on the measured strength and the predicted results, which coincide with one another well, a modified method for predicting the compressive strength of GRLC cubic and cylindrical specimens is proposed.
| Reference Key |
zhang2020axialmaterials
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Zhang, Haiyan;Liu, Jiancheng;Wu, Bo;Zhang, Zhijian; |
| Journal | Materials (Basel, Switzerland) |
| Year | 2020 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.