Hydrogen Production by Partial Oxidation Reforming of Methane over Ni Catalysts Supported on High and Low Surface Area Alumina and Zirconia
Clicks: 315
ID: 260850
2020
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
315 views
63 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #14 of 27 articles by views in processes
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The catalytic activity of the partial oxidation reforming reaction for hydrogen production over 10% Ni supported on high and low surface area alumina and zirconia was investigated. The reforming reactions, under atmospheric pressure, were performed with a feed molar ratio of CH4/O2 = 2.0. The reaction temperature was set to 450–650 °C. The catalytic activity, stability, and carbon formation were determined via TGA, TPO, Raman, and H2 yield. The catalysts were calcined at 600 and 800 °C. The catalysts were prepared via the wet-impregnation method. Various characterizations were conducted using BET, XRD, TPR, TGA, TPD, TPO, and Raman. The highest methane conversion (90%) and hydrogen yield (72%) were obtained at a 650 °C reaction temperature using Ni-Al-H-600, which also showed the highest stability for the ranges of the reaction temperatures investigated. Indeed, the time-on-stream for 7 h of the Ni-Al-H-600 catalyst displayed high activity and a stable profile when the reaction temperature was set to 650 °C.
| Reference Key |
al-fatesh2020processeshydrogen
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | Anis Fakeeha,Ahmed A. Ibrahim,Hesham Aljuraywi,Yazeed Alqahtani,Ahmad Alkhodair,Suliman Alswaidan,Ahmed E. Abasaeed,Samsudeen Olajide Kasim,Mahmud S. Lanre,Ahmed S. Al-Fatesh;Anis Fakeeha;Ahmed A. Ibrahim;Hesham Aljuraywi;Yazeed Alqahtani;Ahmad Alkhodair;Suliman Alswaidan;Ahmed E. Abasaeed;Samsudeen Olajide Kasim;Mahmud S. Lanre;Ahmed S. Al-Fatesh; |
| Journal | processes |
| Year | 2020 |
| DOI |
10.3390/pr8050499
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.