performance evaluation of semiplastic recycled cold asphalt using noncement binders
Clicks: 89
ID: 260254
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
26.4
/100
89 views
23 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #222 of 254 articles by views in bulletin of the korean chemical society
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 254 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The optimal mixing conditions for semiplastic recycled cold asphalt, which recycled waste asphalt and used noncement binders (NCB), were assessed through verification of the performance. The NCB of 6% desulfurization gypsum mixing was found to have the most outstanding properties. For the Marshall stability, 4% (NCB) filler mixing brought about a 1.92-time strength increase effect compared to OPC (2%) and was improved when using modified asphalt and SBR. The flow test results showed that although an increase dosage of filler and SBR decreased the flow value of the semiplastic recycled cold asphalt, an increase dosage of asphalt emulsion improved the flow value. The indirect tensile strength and liquid immersion residual stability for the condition with greatest Marshall stability were most outstanding with 0.95 MPa and 83.6%, respectively. Evaluation of the recycled cold asphalt abrasion durability revealed that for the case of mixing more than 4% NCB the mass loss rate was lower than 20%. The abrasion durability was found to improve when using modified emulsified asphalt and SBR substitution. From the test results, it was found that the optimal mixing proportion of semiplastic recycled cold asphalt satisfied mechanical properties and durability is NCB with 4%, emulsified asphalt with 3%, and SBR substitution with 20%.
| Reference Key |
lee2015advancesperformance
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Byung Jae Lee;Jin Wook Bang;Jeong Su Kim;Young Il Jang |
| Journal | bulletin of the korean chemical society |
| Year | 2015 |
| DOI |
10.1155/2015/239365
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.