physical cleaning of lakhra coal by dense medium separation method

Clicks: 116
ID: 259649
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Emerging

Ranked #30 of 33 articles by views in parkinson's disease

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
This research is an attempt to upgrade Lakhra Lignite Coal using ?Dense Medium Separation? technique, to make it techno-environmentally acceptable product for different industries. The air-dried samples of ROM (Run of Mine) coal were crushed, screened, ground and subjected to initial analysis and specific gravity based sink-float tests. The initial analysis of air-dried samples shows the average values of moisture 19%, volatile matter 22.33%, ash 27.41%, fixed carbon 31.26% and sulphur 4.98%. The investigational results of sink-float analysis indicate that physical cleaning at particle size range from -5.6 to +0.3 mm and 75% clean coal recovery can potentially reduce the ash yield and sulphur content of Lakhra coal up to 41 and 42.4% respectively. This washed coal is techno-environmentally acceptable yield and simultaneously qualifies the quality parameters set by various industries of Pakistan
Reference Key
channa2015mehranphysical Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Sikandar Ali Channa;Safiullah Memon;Muhammad Hashim Rind
Journal parkinson's disease
Year 2015
DOI
DOI not found
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.