olcay genÇyilmaz1,*, ferhunde atay2 and İdris akyÜz2
Clicks: 189
ID: 258115
2014
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
5.4
/100
18 views
18 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
Absract. In this study, the effect of annealing temperature on physical properties of CdS thin films was studied. CdS in the form of thin film was prepared by a simple and inexpensive spray pyrolysis technique for various annealing temperatures. After deposition, films were annealed at 400-450-500 °C for 2 hours at air atmosphere. The effects of the annealing temperature on the physical properties of the films were investigated by studying the transmittance measurements, spectroscopic ellipsometry technique, atomic force microscope (AFM) observations and the four probe technique. The transmittance measurements were used to estimate the band gap energy by the linear fit of (ahn)2 curve. The band gap energy was found to be slightly decreasing with the annealing process. From the four probe measurement the resistivity was determined and found to be strongly decreasing with increasing the annealing temperature. Finally, annealing process and annealing temperature confirmed significant effects on the optical, electrical and surface properties CdS thin films.
| Reference Key |
genyilmaz2014cumhuriyetolcay
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Olcay GENÇYILMAZ;Ferhunde ATAY;İdris AKYÜZ |
| Journal | journal of occupational and environmental hygiene |
| Year | 2014 |
| DOI |
10.17776/csj.69365
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.