analysis of the pre-rotation engine loads in the autogyro
Clicks: 218
ID: 257239
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
218 views
26 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #54 of 71 articles by views in electrochemistry communications
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The paper presents the analyzes of the pre-rotation engine loads in the Taurus autogyro manufactured by Aviation Artur Trendak from Poland. Based on the NACA-9 H-12 airfoil characteristics of the drag coefficient, on which the rotor blade was made, forces acting on the rotor during pre-rotation have been calculated. The paper presents the characteristics of the drag coefficient as a function of angle of attack for Re = 1,800,000 and Re = 2,600,000. For the speed range of 0 to 400 rpm torque resulting from the drag forces and the power required to drive the rotor were calculated.
| Reference Key |
czy2016advancesanalysis
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Zbigniew Czyż;Tomasz Łusiak;Daniel Czyz;Dariusz Kasperek |
| Journal | electrochemistry communications |
| Year | 2016 |
| DOI |
10.12913/22998624/64015
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.