tensile properties and hardness of two types of 11cr-ferritic/martensitic steel after aging up to 45,000 h
Clicks: 234
ID: 255073
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
234 views
42 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #17 of 25 articles by views in american business law journal
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The relationship among tensile strength, Vickers hardness and dislocation density for two types of 11Cr-ferritic/martensitic steel (PNC-FMS) was investigated after aging at temperatures between 400 and 800°C up to 45,000h and after neutron irradiation. A correlation between tensile strength and Vickers hardness was expressed empirically. The linear relationship for PNC-FMS wrapper material was observed between yield stress and the square of dislocation density at RT and aging temperature according to Bailey–Hirsch relation. Therefore, it was clarified that the correlation among dislocation density, tensile strength and Vickers hardness to aging temperature was in good agreement. On the other hand, the relationship between tensile strength ratio when materials were tested at aging temperature and Larson–Miller parameter was also in excellent agreement with aging data between 400 and 700°C. It was suggested that this correlation could use quantitatively for separately evaluating irradiation effects from neutron irradiation data containing both irradiation and aging effects.
| Reference Key |
yano2016nucleartensile
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Y. Yano;T. Tanno;Y. Sekio;H. Oka;S. Ohtsuka;T. Uwaba;T. Kaito |
| Journal | american business law journal |
| Year | 2016 |
| DOI |
10.1016/j.nme.2016.08.007
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.