a current-mode electronically controllable multifunction biquadratic filter using ccciis
Article Quality & Performance Metrics
Readership in this journal
SteadyRanked #22 of 30 articles by views in química nova
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
Abstract
This article presents a current-mode multifunction biquadratic filter performing completely standard functions low-pass, high-pass, band-pass, band-reject and all-pass functions. The circuit principle is based on second-generation current-controlled current conveyor (CCCII) with three input terminals and one output terminal. The features of the circuit are that, the pole frequency can be electronically tuned via the input bias currents. The circuit topology is very simple, consisting of merely 2 CCCIIs and 2 grounded capacitors. Without any external resistor and using only grounded elements, the proposed circuit is very comfortable to further develop into an integrated circuit architecture. The PSpice simulation results are shown. The given results agree well with the theoretical anticipation. The total power consumption is approximately 1.87mW at ±1.5V power supply voltages.
| Reference Key |
siripruchyanun2013internationala
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;MONTREE SIRIPRUCHYANUN;Somchai Srisakultiew;Supawat Lawanwisut |
| Journal | química nova |
| Year | 2013 |
| DOI |
10.11601/ijates.v2i2.11
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.