tailoring activated carbon by surface chemical modification with o, s, and n containing molecules
Clicks: 310
ID: 251398
2003
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Popular Article
30.0
/100
310 views
70 readers
AI Quality Assessment
Not analyzed
Readership in this journal
PopularRanked #20 of 96 articles by views in Majalah Ilmiah Teknologi Elektro
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
In this work the surface of activated carbon was chemically modified in order to introduce O, S and N containing groups. The activated carbon surface was selectively oxidized with concentrated HNO3 under controlled conditions. Characterization by thermogravimetric analyses, infrared spectroscopy and NaOH titration suggested the formation of mainly -COOH and small amounts of -OH groups, with concentration of approximately 4.10(21) groups/g of carbon. These -COOH functionalized carbons showed high adsorption capacity for metal cations in aqueous solution in the following order: Pb+2>Cu+2>Ni+2 >Cd+2~Co+2>Ca+2 , suggesting a cation exchange mechanism via a surface complex [COO-M+2]. These -COOHsurf groups can be reacted with SOCl2 to produce a surface acylchloride group, -COCl. This surface -COCl group proved to be a very reactive and versatile intermediate for the grafting of different S and N containing molecules onto the carbon surface, such as 1,2-ethaneditiol (EDT-, HSCH2CH2SH) 1,7-dimercapto-4-thioheptane (DMTH-HSCH2CH2CH2SCH2CH 2CH2SH) or 1,2-ethylenediamine (EDA- NH2CH2CH2NH2 ) and triethyltetraamine, TEA (H2NCH2CH2NHCH2CH 2NHCH2CH2 NH2). The characterization of these materials was carried out by TG, IR and TPDMS (Temperature Programmed Decomposition Mass Spectrometry) experiments suggesting the formation of thioesther and amide surface groups, i.e. -COSR and -CONHR, with yields of approximately 50 and 75% for the reaction with DME and EDA, respectively. Preliminary adsorption experiments showed that these materials can efficiently remove metals such as Pb+2, Cu+2 and Ni+2 from aqueous medium.
| Reference Key |
rios2003materialstailoring
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Rachel RibeiroVieira Azzi Rios;Dênio Eduardo Alves;Ilza Dalmázio;Sílvio Fernando Vargas Bento;Claudio Luis Donnici;Rochel Monteiro Lago |
| Journal | Majalah Ilmiah Teknologi Elektro |
| Year | 2003 |
| DOI |
10.1590/S1516-14392003000200004
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.