indium-doped zinc oxide thin films as effective anodes of organic photovoltaic devices

Clicks: 199
ID: 250745
2011
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Popular

Ranked #75 of 251 articles by views in construction and building materials

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 251 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Indium-doped zinc oxide (IZO) thin films were prepared by low-cost ultrasonic spray pyrolysis (USP). Both a low resistivity (3.13×10−3 Ω cm) and an average direct transmittance (400∼1500 nm) about 80% of the IZO films were achieved. The IZO films were investigated as anodes in bulk-heterojunction organic photovoltaic (OPV) devices based on poly(3-hexylthiophene) and [6,6]-phenyl C61-butyric acid methyl ester. The device fabricated on IZO film-coated glass substrate showed an open circuit voltage of 0.56 V, a short circuit current of 8.49 mA cm-2, a fill factor of 0.40, and a power conversion efficiency of 1.91%, demonstrating that the IZO films prepared by USP technique are promising low In content and transparent electrode candidates of low-cost OPV devices.
Reference Key
hu2011internationalindium-doped Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Ziyang Hu;Baochen Jiao;Jianjun Zhang;Xiaodan Zhang;Ying Zhao
Journal construction and building materials
Year 2011
DOI
10.1155/2011/158065
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.