influence of the temperature on the tension behaviour of eurofer97 alloy at high strain rate
Clicks: 168
ID: 246857
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
168 views
11 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #102 of 625 articles by views in utilitas mathematica
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 625 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This paper presents an experimental investigation on the influence of the temperature on the reduced activation steel Eurofer97 under uniaxial tensile loads at high strain rate. Round undamaged specimens of this material having gauge length 5 mm, diameter 3 mm, were tested in universal machine to obtain its stress-strain relation under quasi-static condition (0.001s−1), and in modified Hopkinson bar to study its mechanical behaviour at high strain rates (300 s−1, 1000 s−1) respectively. The tests at high strain rate were carried out at 450 °C and at nitrogen temperature. Finally, the parameters of the Zerilli-Armstrong constitutive material relationship were obtained.
| Reference Key |
ezio2015epjinfluence
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Cadoni Ezio;Dotta Matteo;Forni Daniele;Spätig Philippe |
| Journal | utilitas mathematica |
| Year | 2015 |
| DOI |
10.1051/epjconf/20159401022
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.