extrusion of solid wood impregnated with phenol formaldehyde (pf) resin: effect of resin content and moisture content on extrudability and mechanical properties of extrudate
Clicks: 302
ID: 241838
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
302 views
39 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #33 of 185 articles by views in medical archives (sarajevo, bosnia and herzegovina)
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 185 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
A new deformation technique of wood flow forming is promising for industrial uses of solid wood. Flow deformability, size stability, and good mechanical properties were obtained by using wood impregnated with low molecular weight phenol formaldehyde (PF) resin. In this study, to clarify the effect of the PF resin and moisture contents in wood on the flow deformability (extrudability) and the mechanical properties of the product (extrudate), a lateral extrusion was conducted by using wood impregnated with various contents of PF resin and three levels of moisture content. The results indicated that the extrudability of wood impregnated with PF resin improved with an increase in both PF resin and moisture content. The mechanical properties of the extrudate worsened with increases in the moisture content of the wood impregnated with PF resin. Because most of the water in the wood remained in the mold during the extrusion process, chemical changes of the wood substance and PF resin occurred due to steam forming under the high temperature and pressure of the extrusion. The steam worsened the mechanical properties of the extrudate.
| Reference Key |
seki2016bioresourcesextrusion
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Masako Seki;Tomoaki Kiryu;Tsunehisa Miki;Soichi Tanaka;Ichinori Shigematsu;Kozo Kanayama |
| Journal | medical archives (sarajevo, bosnia and herzegovina) |
| Year | 2016 |
| DOI |
10.15376/biores.11.3.7697-7709
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.