fatigue behavior of asphalt mixtures colombian with addition recycled pavement asphalt to 100 %

Clicks: 177
ID: 239308
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #16 of 24 articles by views in scientia iuris

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract

This research was conducted in order to establish the fatigue behavior of asphalt mixtures with gradations MD20 Instituto de Desarrollo Urbano (IDU) and MDC 2 of The Instituto Nacional de Vías (INVIAS), with addition of recycled granular flexible pavement (RAP) with asphalt of penetration 60/70 and 80/100. The first step was to characterize the asphalt and RAP as well as calculate the optimum percentage of asphalt to be added to 100 % RAP mixtures. Then samples were fabricated with different trapezoidal gradations and asphalt, to be tested finally fatigue at different deformations. Among the results found, it was determined that the tested mixtures have a high stiffness; although, it varies depending on the asphalt mix used and that the best fatigue life with respect to those studied is the MDC-2 with bitumen 80/100.

Reference Key
boyac2015tecnurafatigue Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Neidy Betssey Patiño Boyacá;Oscar Javier Reyes Ortiz;Javier Fernando Camacho Tauta
Journal scientia iuris
Year 2015
DOI
10.14483/udistrital.jour.tecnura.2015.1.a05
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.