stress distribution of cf/ep laminated composites under supercritical conditions
Clicks: 131
ID: 231498
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
131 views
12 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #59 of 80 articles by views in 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
Enormous amounts of wastes have been produced due to extensive use of carbon fiber/epoxy resin (CF/EP) composites. The fact that the supercritical fluid can be used to recycle these composites efficiently has attracted widespread concerns. A three-dimensional model of CF/EP laminates considering the interfacial layers was established. The internal stress distribution of laminates was simulated based on a heat transfer model; and the change of shear stress with supercritical temperature and pressure was investigated. The results show that the shear stress concentration was located in the interfacial layers; the maximum shear stress can be expressed by a curve of convex parabola to the temperature; and the most serious damage occurred in interfacial layers when temperature approached the glass-transition temperature of resin.
| Reference Key |
huang2015internationalstress
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Haihong Huang;Zhenwen Li;Huanbo Cheng;Yanzhen Yin |
| Journal | 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7 |
| Year | 2015 |
| DOI |
10.1155/2015/715753
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.