combustion characteristics of wood panels treated with phosphorus-nitrogen additives

Clicks: 334
ID: 230235
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Emerging

Ranked #17 of 185 articles by views in medical archives (sarajevo, bosnia and herzegovina)

Most read Least read

Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 185 in total.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
The combustion characteristics were evaluated for wood samples either untreated or treated with a piperazine-N-N´-bis(methylenephosphonic acid) flame retardant. Combustion properties were investigated using a cone calorimeter (ISO 5660-1 2002). The time to ignition of samples treated with the chemical additive was delayed by 193%, 124%, and 61% for maple, ash, and cypress, respectively, compared with the untreated samples. Compared with the untreated sample, the PHRR value was reduced by 20% for t-ash and by 2.6% for cypress, whereas it was increased by 0.28% for t-maple. The time of PHRR for the treated sample was shifted to 1605 s (698%), 470 s (45%), and 340 s (32%) for cypress, ash, and maple, respectively, compared with the untreated samples. The reduced PHRR value and postponed time to PHRR indicated that combustion was suppressed by the thicker char layer. The mean CO yield of t-ash and t-cypress was increased by 2.9% and 27%, respectively, compared with the untreated sample, but t-maple was reduced by 46% compared with maple. The mean CO2 yield of t-maple, t-ash, and t-cypress was decreased by 4%, 13%, and 37%, respectively, compared with the untreated sample. The combustion properties of treated wood were inhibited more than those of untreated wood.
Reference Key
jin2016bioresourcescombustion Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Eui Jin;Yeong-Jin Chung
Journal medical archives (sarajevo, bosnia and herzegovina)
Year 2016
DOI
10.15376/biores.11.2.4319-4331
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.