studying the effect of fillet on fretting fatigue strength in the press-fitted axle assembly using different multiaxial fatigue criteria and fretting fatigue damage darameter
Clicks: 203
ID: 229826
2016
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
203 views
22 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #38 of 50 articles by views in The Analyst
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The present paper studies the effect of creating a fillet on fretting fatigue strength of an axle, using different multiaxial fatigue criteria and fretting fatigue damage parameter. Finite element method is applied to obtain stress and strain in the axle and the results obtained from modeling are compared with the experimental test data available in literature. The results show that fretting fatigue strength of the axle and fracture area depends on the ratio of diameter to fillet radius. Multiaxial fatigue criteria is almost capable of estimating the fatigue strength of the axle . However; the results obtained from investigating fretting fatigue damage parameter are almost in accordance with the results of experimental data and consequently fretting fatigue damage parameter can be appropriately used as a criterion for estimating fretting fatigue strength of the axles.
| Reference Key |
zehsaz2016ravish/h-yistudying
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;M. Zehsaz;P. Shahriary |
| Journal | The Analyst |
| Year | 2016 |
| DOI |
DOI not found
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.