macro-micro failure mechanisms and damage modeling of a bolted rock joint
Clicks: 128
ID: 228645
2017
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
128 views
24 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #184 of 254 articles by views in bulletin of the korean chemical society
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 254 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The anchoring mechanism of a bolted joint subjected to a shear load was investigated using a bilinear constitutive model via the inner-embedded FISH language of particle flow code based on the discrete element method. The influences of the anchoring system on the macro-/micromechanical response were studied by varying the inclination angle of the bolt. The results indicate a clear relationship between the mechanical response of a bolted rock joint and the mechanical properties of the anchoring angle. By optimizing the anchorage angle, the peak strength can be increased by nearly 50% relative to that at an anchorage angle of 90°. The optimal anchorage angle ranges from 45° to 75°. The damage mechanism at the optimal anchorage angle joint is revealed from a macroscopic mechanical perspective. The concentration of the contact force between disks will appear in the joint and around the bolt, resulting in crack initiation. These cracks are mainly tensile cracks, which are consistent with the formation mechanism for compression-induced tensile cracks. Therefore, the macroscopic peak shear stress in the joint and the microscopic damage to the anchoring system should be considered when determining the optimal anchoring angle to reinforce a jointed rock mass.
| Reference Key |
wang2017advancesmacro-micro
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Gang Wang;Yongzheng Zhang;Yujing Jiang;Shugang Wang;Wenjun Jing |
| Journal | bulletin of the korean chemical society |
| Year | 2017 |
| DOI |
10.1155/2017/1627103
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.