measurement of cao-sio2-sacl2 slag density by an improved archimedean method
Clicks: 183
ID: 225758
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
183 views
37 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #16 of 25 articles by views in computational statistics
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
In order to optimize the removal of boron during the refining of slag to
obtain solar grade silicon, the density of molten slag was measured by an
improved Archimedean method within a temperature range from 1073 to 1373 K.
It was found that the density of molten slag at 1723 K can be deduced by
linear fitting, and that the slag density decreases with increasing
temperature. However, a reduction in slag density occurs with decreasing CaO
concentration. An increase in the molar volume of slag was also observed with
increasing temperature.
| Reference Key |
y.2015journalmeasurement
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Wang Y.;Morita K. |
| Journal | computational statistics |
| Year | 2015 |
| DOI |
10.2298/JMMB140905016W
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.