Timing-Error Detection Design Considerations in Subthreshold: An 8-bit Microprocessor in 65 nm CMOS

اعتبارات تصميم كشف أخطاء التوقيت في النطاق دون العتبة: معالج دقيق ذو 8 بتات بتقنية CMOS بدقة 65 نانومتر

Clicks: 413
ID: 22397
2012
Free PDF
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Star

Ranked #2 of 4 articles by views in journal of low power electronics and applications

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
This paper presents the first known timing-error detection (TED) microprocessor able to operate in subthreshold. Since the minimum energy point (MEP) of static CMOS logic is in subthreshold, there is a strong motivation to design ultra-low-power systems that can operate in this region. However, exponential dependencies in subthreshold, require systems with either excessively large safety margins or that utilize adaptive techniques. Typically, these techniques include replica paths, sensors, or TED. Each of these methods adds system complexity, area, and energy overhead. As a run-time technique, TED is the only method that accounts for both local and global variations. The microprocessor presented in this paper utilizes adaptable error-detection sequential (EDS) circuits that can adjust to process and environmental variations. The results demonstrate the feasibility of the microprocessor, as well as energy savings up to 28%, when using the TED method in subthreshold. The microprocessor is an 8-bit core, which is compatible with a commercial microcontroller. The microprocessor is fabricated in 65 nm CMOS, uses as low as 4.35 pJ/instruction, occupies an area of 50,000 μm<sup>2</sup>, and operates down to 300 mV.
تقدم هذه الورقة البحثية أول معالج دقيق معروف مزود بتقنية كشف أخطاء التوقيت (TED) وقادر على العمل في منطقة دون العتبة (subthreshold). ونظرًا لأن نقطة استهلاك الطاقة الأدنى (MEP) لمنطق CMOS الساكن تقع في منطقة دون العتبة، فإن هناك دافعًا قويًا لتصميم أنظمة فائقة انخفاض استهلاك الطاقة يمكنها العمل في هذا النطاق. ومع ذلك، تفرض التبعيات الأُسية في منطقة دون العتبة الحاجة إلى أنظمة تعتمد إما على هوامش أمان كبيرة للغاية أو على تقنيات تكيُّفية. وتتضمن هذه التقنيات عادةً المسارات المطابقة (replica paths)، أو المستشعرات، أو تقنية كشف أخطاء التوقيت (TED). وتضيف كل واحدة من هذه الطرق تعقيدًا إلى النظام، فضلًا عن استهلاك إضافي للمساحة والطاقة. وبصفتها تقنية تعمل في وقت التشغيل، تُعد تقنية TED الطريقة الوحيدة التي تأخذ في الحسبان كلاً من التغيرات المحلية والشاملة. ويستخدم المعالج الدقيق المقدم في هذه الورقة دوائر تتابعية متكيفة لكشف الأخطاء (EDS) يمكنها التكيف مع التغيرات في عملية التصنيع والظروف البيئية. وتُثبت النتائج الجدوى العملية للمعالج الدقيق، فضلًا عن تحقيق وفر في الطاقة يصل إلى 28% عند استخدام طريقة TED في منطقة دون العتبة. يتكون المعالج الدقيق من نواة بعرض 8 بت، متوافقة مع متحكم دقيق تجاري. وقد صُنِّع المعالج بتقنية CMOS بدقة 65 نانومتر، ويستهلك طاقة منخفضة تصل إلى 4.35 بيكوجول/تعليمة، ويشغل مساحة قدرها 50,000 μm<sup>2</sup>، ويعمل بجهد تشغيل يصل انخفاضه إلى 300 ميليفولت.
Reference Key
koskinen2012timingerrorjournal Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors
Journal journal of low power electronics and applications
Year 2012
DOI
DOI not found
URL
Keywords Keywords not found

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.