comparative study of enzymatic hydrolysis properties of pulp fractions from waste paper
Clicks: 163
ID: 223264
2015
Article Quality & Performance Metrics
Overall Quality
Improving Quality
0.0
/100
Combines engagement data with AI-assessed academic quality
Reader Engagement
Emerging Content
5.1
/100
17 views
17 readers
Trending
AI Quality Assessment
Not analyzed
Abstract
As a lignocellulosic material, wastepaper is a potential material for ethanol production. However, little research on the enzymatic hydrolysis of wastepaper pulp has been conducted. In this study, the enzymatic hydrolysis of different waste pulp fractions (R80 represents greater than 80-mesh wastepaper pulp, R80-180 represents the range of 80- to 180-mesh wastepaper pulp, and R180 represents smaller than 180-mesh waste paper pulp) were carried out at 50 °C, pH 4.8, for 96 h, with a substrate concentration of 5% (w/v) and cellulase loading of 18 FPU/g cellulose. In terms of the specific surface area, fiber structure, and surface morphology, R80-180 had the highest affinity to cellulase and therefore the highest glucose yield of 80.33%. R180 had the lowest glucose yield (55.36%) because of its high ash content (21.36%), which reduced the adsorption of cellulase to cellulose. The enzymatic hydrolysis of R80 mixed with R80 or R80-180 was also studied. Results indicated that adding R80-180 increased the glucose yield of R80. The highest glucose yield (82.57%) was obtained when 15% R80-180 was mixed with R80. However, the glucose content decreased when R180 was mixed with R80 because of its high ash content.
| Reference Key |
li2015bioresourcescomparative
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Xiaoli Li;Hailong Yu;Dafeng Sun;Jianxin Jiang;Liwei Zhu |
| Journal | medical archives (sarajevo, bosnia and herzegovina) |
| Year | 2015 |
| DOI |
10.15376/biores.10.3.3818-3830
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.