study on the progressive failure characteristics of coal in uniaxial and triaxial compression conditions using 3d-digital image correlation
Clicks: 202
ID: 216175
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Emerging Content
30.0
/100
202 views
28 readers
AI Quality Assessment
Not analyzed
Readership in this journal
EmergingRanked #282 of 526 articles by views in acs combinatorial science
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 526 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
To investigate the progressive failure process of coal, a series of uniaxial and triaxial compression tests were conducted and a novel 3D digital image correlation instrument with six cameras combined with a special transparent pressure cell was used for the strain measurement. The stress thresholds of coal were obtained in uniaxial and triaxial compression. The energy evolution during the compression was discussed, coupled with the crack volumetric strain. The field strain of the whole specimen surface and crack propagation at different stress levels were described to study the progressive failure mechanism of coal. The average stress level of crack initiation and crack damage of coal in uniaxial compression are 43.75% and 63.03%, while that in the triaxial compression are 74.53% and 89.84%, respectively. The dissipation energy evolution corresponds to the crack volumetric strain, while the elastic energy release leads to flake ejection and coal failure. The crack evolution and localization of coal indicated the progressive failure process that the coal sample undergoes in tension failure in uniaxial compression and in tension-shear failure in triaxial compression. The findings of this study can serve as a reference to understand the failure process of coal and improve the stability and safety of mining engineering.
| Reference Key |
tang2018energiesstudy
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Yang Tang;Seisuke Okubo;Jiang Xu;Shoujian Peng |
| Journal | acs combinatorial science |
| Year | 2018 |
| DOI |
10.3390/en11051215
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.