influence of the uniaxial hot-pressing sintering condition on bi4ge3o12 ceramic scintillators
Clicks: 211
ID: 213097
2018
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
211 views
26 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #109 of 150 articles by views in acs nano
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 150 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The production of high-density bismuth germanate (Bi3Ge4O12) ceramic scintillators by uniaxial hot pressing was investigated as a function of different applied pressure conditions. The X-ray diffraction showed that the sintering process was able to eliminate the undesirable secondary phase present in the nonsintered samples. The height changes from samples with higher applied pressure rate and applied pressure duration lead to a better relative density value, >95% for samples sintered under a pressure of 0.14 and 0.18 MPa. The radioluminescence results showed that all samples have the characteristic emission spectra of Bi3Ge4O12 and that the hot-pressed samples have higher radioluminescence emission efficiency.
| Reference Key |
matos2018journalinfluence
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Ivus L. O. Matos;Adriano B. Andrade;Zélia S. Macedo;Mário E. G. Valerio |
| Journal | acs nano |
| Year | 2018 |
| DOI |
10.1155/2018/5732561
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.