obtaining a flexible film elaborated from cassava thermoplastic starch and polylactic acid
Clicks: 172
ID: 205979
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
172 views
18 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #29 of 80 articles by views in 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
A flexible film was obtained from a blend of cassava thermoplastic starch and polylactic acid, using maleic anhydride as coupling agent. For this, an experimental design with three factors was used: polylactic acid content, coupling agent content, and temperature profile of the blown extrusion. It was found that the three factors generated significant differences on the response variables of tensile mechanical properties individually as in their triple interaction. Differential scanning calorimetry (DSC) was used by understanding the behavior of thermal properties of TPS/PLA blends with and without coupling agent, finding similar results between both. From this, the combination with 28% polylactic acid, 0.87% coupling agent, and 155.75°C temperature profile permitted the obtaining of a material with outstanding mechanical properties and offered advantages from the economic point of view.
| Reference Key |
arboleda2015internationalobtaining
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Germán A. Arboleda;Camilo E. Montilla;Héctor S. Villada;Giovanni A. Varona |
| Journal | 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7 |
| Year | 2015 |
| DOI |
10.1155/2015/627268
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.