stress and modal analisys report for avert program
Clicks: 86
ID: 205851
2009
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
25.5
/100
86 views
11 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #27 of 32 articles by views in biotechnology letters
Most read
Least read
Bar heights use a square-root scale.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
This report presents a modal and a static analysis of the assembly wing-flap ,using the finite element software’s ANSYS 11 PATRAN-NASTRAN 2007. The geometry was created in Catia V5 R18and imported. The results from the modal analysis refer to the natural frequencies and represent the displacement vector sum for each frequency. For the static analysis, 17 zones of pressure were chosen. For each zone the pressures values were calculated using the pressure distribution resulted from the INCAS subsonic wind tunnel experiments. For this analysis the results consist in the displacement vector sum and the Von Mises equivalent stress.
| Reference Key |
lozici2009incasstress
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Dorin LOZICI;Bogdan CALOIAN;RADU BISCA |
| Journal | biotechnology letters |
| Year | 2009 |
| DOI |
10.13111/2066-8201.2009.1.1.6
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.