synthesis, characterization and swelling characteristics of graft copolymerized isotactic polypropylene film

Clicks: 202
ID: 203408
2010
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This article has not been analysed, so there is no overall score — reader engagement is measured and shown alongside.
AI Quality Assessment
Not analyzed
Readership in this journal
Steady

Ranked #21 of 80 articles by views in 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7

Most read Least read

Bar heights use a square-root scale.

Mint this article as an NFT
Not yet minted

Create a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.

5 SUSD one-off · no wallet required
Abstract
Grafted membranes were prepared through chemical graft copolymerization of methyl methacrylate (MMA) onto isotactic polypropylene film (IPP). The IPP films were grafted with MMA molecules resulting in IPP-g-MMA grafts using benzoyl peroxide as an initiator in an inert nitrogen atmosphere. Using this method, the degree of grafting and morphology could be controlled through the variation of reaction parameters such as initiator concentration, monomer concentration, reaction time, and the reaction temperature. Optimum conditions pertaining to maximum percentage of grafting (%G) were evaluated as a function of these parameters. Maximum percentage of grafting (50%) was obtained at [BPO]=0.03 M, [MMA]=10% V/V, and [Reaction Temperature] = 70∘C in a [Reaction time] of 120 minutes. IPP-g-MMA films were investigated for their swelling behavior. Water-swelling analysis of IPP-g-MMA was carried out as a function of different percentage of grafting, temperatures, and time. Maximum swelling percentage of IPP-g-MMA (92%) was observed in 8 hours at 60∘C. The evidence of grafting was carried out by Fourier transform spectroscopy (FTIR), atomic force microscopy (AFM), and scanning electron microscopy (SEM) before and after grafting, respectively. The swelling pattern was characterized by two distinct stages, an initial diffusion-controlled fast swelling, followed by a subsequent slower process controlled by the relaxation of polymer fragments. Swelling chrematistics of IPP-g-MMA make it a potentially useful material.
Reference Key
sehgal2010internationalsynthesis, Use this key to autocite in the manuscript while using SciMatic Manuscript Manager or Thesis Manager
Authors ;Teena Sehgal;Sunita Rattan
Journal 19th international congress of chemical and process engineering, chisa 2010 and 7th european congress of chemical engineering, ecce-7
Year 2010
DOI
10.1155/2010/147581
URL
Keywords

Citations

No citations found. To add a citation, contact the admin at info@scimatic.org

No comments yet. Be the first to comment on this article.