effect of bamboo species and resin content on properties of oriented strand board prepared from steam-treated bamboo strands
Clicks: 151
ID: 199944
2015
Article Quality & Performance Metrics
Overall Quality
Not rated
Combines reader engagement with the AI quality analysis. This
article has not been analysed, so there is no overall score —
reader engagement is measured and shown alongside.
Reader Engagement
Steady Performance
30.0
/100
151 views
32 readers
AI Quality Assessment
Not analyzed
Readership in this journal
SteadyRanked #162 of 185 articles by views in medical archives (sarajevo, bosnia and herzegovina)
Most read
Least read
Bar heights use a square-root scale. Only the 120 most-read articles are drawn; the journal has 185 in total.
Mint this article as an NFT
Not yet mintedCreate a permanent, verifiable on-chain record of this article on the Scimatic Network. The NFT is held in your Journament account, and you can withdraw it to your own wallet at any time.
5
SUSD
one-off · no wallet required
Abstract
The objective of this research was to evaluate the effect of bamboo species and resin content on the physical and mechanical properties of oriented strand boards (OSBs) prepared from steam-treated bamboo strands. The strands from three species of Indonesian bamboo, namely Andong (Gigantochloa verticillata), Betung (Dendrocalamus asper), and Ampel (Bambusa vulgaris), were steamed at 126 °C for 1 h at a pressure of 0.14 MPa. Three-layered OSBs with the core layer oriented perpendicularly to the face layers were prepared by bonding them together with 3 to 5% methylene diphenyldiisocyanate (MDI) resin based on oven-dried strands and with the addition of 1% paraffin. The strand compositions for the face, core, and back layers were 25%, 50%, and 25%, respectively. The slenderness ratios and aspect ratios of the strands ranged from 71.02 to 76.60 and from 2.96 to 3.02, respectively. The physical and mechanical properties of the OSBs fabricated from Andong and Betung were better than those from Ampel, and the properties of all OSBs were improved by increasing their resin content. OSBs from Betung with 3 to 5% resin content and those from Andong and Ampel with 4 to 5% resin content showed strength retention of more than 50%, which means they can be used for exterior structural applications. Except for OSBs fabricated from Ampel with 3% resin content, the properties of all OSBs prepared in this study were higher than the minimum values required by the CSA O437.0 (grade O-1) standard (2011).
| Reference Key |
febrianto2015bioresourceseffect
Use this key to autocite in the manuscript while using
SciMatic Manuscript Manager or Thesis Manager
|
|---|---|
| Authors | ;Fauzi Febrianto;Jae-Hyuk Jang;Seung-Hwan Lee;Indra Agus Santosa;Wahyu Hidayat;Jin-Heon Kwon;Nam-Hun Kim |
| Journal | medical archives (sarajevo, bosnia and herzegovina) |
| Year | 2015 |
| DOI |
10.15376/biores.10.2.2642-2655
|
| URL | |
| Keywords |
Citations
No citations found. To add a citation, contact the admin at info@scimatic.org
Comments
No comments yet. Be the first to comment on this article.